Use this quick reference chart for the most common metric sizes found on standard hardware packaging, or scroll down to our interactive calculator for custom measurements.
| Cabinet Pull Size (mm) | Raw Decimal Inches | Tape Measure Equivalent |
|---|---|---|
| 32mm | 1.26″ | 1 1/4″ |
| 64mm | 2.52″ | 2 1/2″ |
| 96mm | 3.78″ | 3 3/4″ |
| 128mm | 5.04″ | 5 1/16″ |
| 160mm | 6.30″ | 6 5/16″ |
| 192mm | 7.56″ | 7 9/16″ |
| 224mm | 8.82″ | 8 13/16″ |
| 256mm | 10.08″ | 10 1/16″ |
| 288mm | 11.34″ | 11 5/16″ |
| 320mm | 12.60″ | 12 5/8″ |
Have a Custom Hardware Size?
If your cabinet pulls don’t match the standard sizes in the chart above, use our interactive conversion calculator below. Enter any metric measurement to instantly get your exact tape measure drilling fraction.
Cabinet Pull Metric Conversion Calculator
Instantly translate standard cabinet hardware measurements from millimeters into precise U.S. inches and usable tape-measure fractions.
How to Use the Calculator
This tool translates metric hardware dimensions into exact U.S. decimals for ordering and auto-reduced tape measure fractions for drilling your cabinet fronts.
- Cabinet Pull Measurement (mm): Find the physical length on your hardware spec sheet or packaging and enter the numerical value (e.g., 128) into the field.
Understanding Your Results
- Raw Decimal Inches: The tool divides your metric input by 25.4 to provide the precise decimal equivalent. Use this number to match specifications when ordering hardware online.
- Tape Measure Equivalent: The calculator separates the whole inches, converts the decimal remainder to 16ths, and auto-reduces the fraction to standard markings (like 1/2″, 1/4″, or 5/8″). Built-in rollover protection prevents confusing readouts, turning a calculation like “3 16/16” into a clean “4 inches” on the screen.
This dual-output system guarantees accuracy whether you are looking at digital specs on a screen or standing in front of your cabinets with a drill and a tape measure.
Tools Needed
- Tape measure (with exact 1/16″ markings)
- Cabinet hardware mounting jig or template
- Power drill with a brad point bit
- Painter’s tape
Always check local building codes and HOA guidelines before starting.
Project Overview
Using the right Cabinet Pull Size Chart & Metric Conversion Calculator prevents misaligned drill holes and ruined drawer fronts. European 32mm system standards dictate global manufacturing, meaning you are usually dealing with metric measurements out of the box. Attempting to eyeball the conversion manually often results in off-center hardware.
Matching your specific cabinet pull sizes to standard cabinet hardware sizes keeps the entire installation exact. You need a reliable way to switch between the digital specs required for buying cabinet hardware sizes online and the physical fractions required by a standard U.S. tape measure. This calculator locks in your layout so you drill correctly the first time.
What size cabinet pull do I need?
The industry rule of thumb dictates that your pull length should be roughly 1/3 the length of your cabinet door or drawer front. Standard drawers take a 3″ to 4″ pull, while wider, heavy-duty drawer banks require longer hardware.
Enter your metric hardware specs into the calculator above to find your exact drilling measurements in standard U.S. tape measure fractions.
Frequently Asked Questions
Q. How to measure cabinet hardware?
A. Measure center-to-center. Place the end of your tape measure at the dead center of the first screw hole and pull it straight across to the exact center of the second screw hole. This gives you your drilling layout, ignoring the total physical length of the handle.
Q. What size hardware for kitchen cabinets?
A. Standard kitchen drawers usually require a 3″ to 4″ pull. For heavier pots-and-pans drawers or modern layouts, contractors upgrade to larger sizes, frequently installing 128mm or 160mm hardware to provide better leverage and improved visual balance across the wider drawer faces.
Q. What size cabinet hardware do professional cabinet installers use?
A. Professionals primarily use metric measurements, commonly installing 96mm, 128mm, and 160mm cabinet pulls. Because European 32mm system standards dominate hardware manufacturing globally, these specific metric lengths remain the default industry standard for both custom and production cabinetry jobs.
Planning your next project? Browse our master hub of Free DIY Home & Garden Calculators to get instant material lists, spacing math, and budget estimates.